reference acceleration

dear sirs,

what is the effect of increasing or decreasing of parameter p2007(reference acceleration) on the time required to reach max speed

mourad76

what is the effect of increasing or decreasing of parameter p2007(reference acceleration) on the time required to reach max speed

 Hello,

In general: Increasing the acceleration time,reduce the required time to reach max speed and vice versa.

mourad76

dear sirs,

what is the effect of increasing or decreasing of parameter p2007(reference acceleration) on the time required to reach max speed

 No.  The time required to reach Max speed will depend on the Ramp Up time.

Here is the decription of P2007 from STARTER Help

HI

Reference acceleration is the time required for speed setpoint  to increase

Faster time means, suppose 300 rpm to 400 rpm in how fast steps say 310, 320... 340

Slow ref acceleration is the time for say 305,310,315 

vijay

it depend on inertia example less require inertia less acceleration time high or heavy inertia more acceleration time.

Acceleration, in physics, is the rate of change of velocity of an object. An object's accelerations is the net result of any and all forces acting on the object, as described by Newton's Second Law.

This will be load related. Acceleration time depend on application like Pump or fan curves will be helpful, torque requirement, time needed to start for system response may require upsizing the drive to meet application. 

The start up time or acceleration time depends upon the motor transient time or it can be said it depends on motor's inertial. Heavy the motor (i,e. high inertia), it will take more to time to settle.

suppose that i want to run the motor from o to 1500 rpm and the ramp up time is 5 seconds and acceleration reference is 25 rev/s2

what is the effect of changeing acceleration reference to 10 rev/s2?