Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Releasing the brake on S210

Created by: papayaka at: 3/18/2020 10:19 AM (12 Replies)

Rating (1)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

3/20/2020 10:54 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello, following would be possible in PostServo If inputopenbrake = True then _...AddressOut".STW1.OpenHoldingBrake” := True; end_if; If inputopenbrake = False AND flagopen = True then _...AddressOut".STW1.OpenHoldingBrake” := False; end_if; flagopen:= inputopenbrake;
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

3/26/2020 11:23 AM	Rate (0)
papayaka Regular Member Joined: 4/1/2018 Last visit: 11/16/2023 Posts: 13 Rating: (0)	Hello, Thanks it works. how can i check that the brake is released when the technological object drives the engine?

Suggestion To thank Quote Answer

3/26/2020 12:25 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 12/20/2024 Posts: 5974 Rating: (820)	Hello, you can check Statusword1 Bit 12 of the telegramm. It schows the signal for the brake.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on