Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Remote IO and analog inputs-TIA Portal to Eplan

Created by: G.vs at: 4/9/2018 2:31 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/9/2018 2:31 PM	Rate (0)
G.vs Experienced Member Joined: 3/26/2018 Last visit: 6/27/2024 Posts: 38 Rating: (1)	Hi all, I am doing my graduation project and the setup (configuration in TIA Portal) is: main deckboard: 1x: CPU 1510SP-1 PN 5x: DI 8x24VDC ST 5x: AI 4xRTD/TC 2,3,4-wire HF 4x: AI 4xI 2-/4-wire ST 2x: DQ 8x24VDC/0.5A ST 17x: RQ NO 4x120VDC/230VAC/5A ST Then a profinet cable to: Main deckboard 2: 1x: IM 155-6 PN HF with server module 3x: DI 8x24VDC ST 4x: AI 4xRTD/TC 2,3,4-wire HF 4x: AI 4xI 2-/4-wire ST 23x: RQ NO 4x120VDC/230VAC/5A ST 1x: CM 4xIO-Link ST And also to: Remote IO Island 1 : 1x: IM 155-6 PN BA with server module 1x: CM 4xIO-Link ST And to: Remote IO Island 2: IM 155-6 PN BA with server module CM 4xIO-Link ST Now my question: I've made the macro's of these modules, but Eplan doesn't recognizes the AI modules AND taglist. With other words: Eplan only recognizes the digital inputs en digital outputs of "Main Deckboard". How can this be? Because I've made a macro for them and putted it in the article, and on main deckboard everything went wright, but not the analog inputs. does somebody have an idea about this problem? Regards

Suggestion To thank Quote Answer

4/9/2018 4:43 PM	Rate (0)
KFoldesi Silver Member Joined: 9/8/2011 Last visit: 8/7/2024 Posts: 537 Rating: (86)	Not sure what you want help with? The Analog cards or the Macro?
	A smart person learns from their mistakes A wise person learns from others mistakes
Suggestion To thank Quote Answer

4/9/2018 7:50 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 9/20/2024 Posts: 15212 Rating: (2417)	What did the eplan support forums have to say? It seems like you are asking an eplan question here.
	science guy
Suggestion To thank Quote Answer

4/10/2018 7:42 AM	Rate (0)
G.vs Experienced Member Joined: 3/26/2018 Last visit: 6/27/2024 Posts: 38 Rating: (1)	huggy_d1 What did the eplan support forums have to say? It seems like you are asking an eplan question here. The eplan support are not willing to help me, because I am student...

Suggestion To thank Quote Answer

4/10/2018 9:09 AM	Rate (0)
G.vs Experienced Member Joined: 3/26/2018 Last visit: 6/27/2024 Posts: 38 Rating: (1)	KFoldesi Not sure what you want help with? The Analog cards or the Macro? My macro is OK, but Eplan doesn't recognizes it automatically, And also, the IO-list is empty for the analog inputs and after I4.7 and Q18.0, it doesn't recognize IW5 - IW71, I85.0 - I87.7, IW88 - IW146 and Q19.0 - Q41.7. See attachment So the problem is that Eplan only recognizes DIGITAL IO's from the main deckboard, and not from the other boards nothing.. Best Regards Attachment CAP1.JPG (117 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on