Industry Online Support
Technical Forum
1/13/2015 3:47 PM | |
Joined: 5/28/2014 Last visit: 12/31/2023 Posts: 32 Rating: (0) |
Dear H-H I am facing a problem while configuring Report System Error in CPU 315-2 PN/DP. I have generated all blocks and Configured HW Configuration and PC Station using IE General v8.2. When I am triggering any Alarm (e.g. Removing I/O card) it gives me Message in CPU Messages window but its not displaying in WinCC 7.2. I need these messages in WinCC 7.2. Can you help me. Thank you ---------- New subject after splitting from Report system error. |
Last edited by: Min_Moderator at: 1/13/2015 4:50 PMSplitted |
|
Follow us on