Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Reuse 400 I/O modules in S7-1500?

Created by: Kath at: 1/21/2021 4:06 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

1/21/2021 4:06 PM	Rate (0)
Kath Advanced Member Joined: 1/20/2015 Last visit: 11/29/2023 Posts: 8 Rating: (1)	We have an old project we want to migrate to S7-1500. The actual PLC is a CPU412-2DP with central I-O-modules. We want to move to a S7-1500 PLC. Is it possible to reuse the 400-I/O-modules? Is there an interface module for 400-I/O-modules? Best regards,

Suggestion To thank Quote Answer

1/21/2021 4:08 PM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/1/2023 Posts: 21949 Rating: (2927)	not possible

Suggestion To thank Quote Answer

1/21/2021 4:13 PM	Rate (0)
Kath Advanced Member Joined: 1/20/2015 Last visit: 11/29/2023 Posts: 8 Rating: (1)	Thank you for the quick answer

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on