Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Rotary knife paper cutter machine application

Created by: sandy_kalsi at: 4/8/2011 11:25 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/8/2011 11:25 AM	Rate (0)
sandy_kalsi Posts: 9 Rating: (0)	Dear Sir I am using the SSD parker( 690+) Drive for Rotary knife paper cutter machine application in this machine One Feeder Motor run by drive for Pulling paper and the rottory cutter drive for cutter having Two Encodure input For Paper Sheet contact and cutter motor feedback. the cutting length is feed in th Drive display to change Electronic gearing then to cutting length . iwant to use the Siemens drive please help me
sandy_kalsi Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

4/11/2011 6:28 PM	Rate (0)
Zenta Silver Member Joined: 10/12/2006 Last visit: 11/15/2024 Posts: 206 Rating: (25)	Hi sandy_kalsi, Maybe this link is helpfully for you: http://support.automation.siemens.com/WW/news/en/31073433 Regards Zenta

Suggestion To thank Quote Answer

5/20/2011 11:08 AM	Rate (0)
Manfred Experienced Member Joined: 6/22/2006 Last visit: 3/7/2022 Posts: 156 Rating: (17)	Hi, you can also have a look to that http://support.automation.siemens.com/WW/view/en/37706606 Regards Manfred

Suggestion To thank Quote Answer

5/27/2019 12:25 PM	Rate (0)
ADAUTOMATION1234 Member Joined: 10/4/2015 Last visit: 3/16/2024 Posts: 4 Rating: (0)	hi, Sandy I made Rotary knife by 690 parker but it was not perfect. Could you please to support your file 690?

Suggestion To thank Quote Answer

7/12/2019 8:44 AM	Rate (0)
ngovanbinh Regular Member Joined: 6/25/2016 Last visit: 9/30/2024 Posts: 2 Rating: (0)	Dear Sandy I made Rotary knife by 690 Parker but it was not perfect. Could you please to support your file 690? [snip]
	Last edited by: Jen_Moderator at: 07/12/2019 09:45:51 Removed E-Mail address.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on