Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Running sinamics G120-B by terminal control.

Created by: DeanZ at: 7/27/2012 9:05 AM (14 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

11/30/2013 1:47 PM	Rate (0)
Ranjan Kamath Posts: 14 Rating: (0)	Hello, I have same problem,did u find soulution how to run by terminal control.
Ranjan Kamath Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

12/3/2013 1:04 PM	Rate (0)
sparten Posts: 205 Rating: (11)
sparten Posts: 205 Rating: (11)	Last edited by: sparten at: 12/3/2013 1:07 PM Last edited by: sparten at: 12/3/2013 1:06 PM
Suggestion To thank Quote Answer

12/3/2013 1:05 PM	Rate (0)
sparten Posts: 205 Rating: (11)	DeanZ Hi All...Please help me...I'm new in using sinamics. My problem is I dnt know how to running by terminal control. I'm using CU240B-2 and PM 240. Anyone can help me??please!...I thought if I set P700 to 2(terminals) and connect terminal 9 and 5 it can run, but still not run..please help me..... Hello DeanZ, it is seems like that there is wiring problem in cu input connection.. please connect terminal 28,34,69 to each other and take 24v DC terminal from 9 number terminal to terminal 5 of CU.. after this if your problme is not solve then there may be problem in your hardware...
sparten Posts: 205 Rating: (11)
Suggestion To thank Quote Answer

2/17/2014 11:10 AM	Rate (0)
Amol Shah Posts: 1 Rating: (0)	just set parameter P015 to macro 12 and see that Parameter P0810=0 and P0840.0=722.0
Amol Shah Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/30/2018 2:52 PM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 12/26/2024 Posts: 1155 Rating: (142)	Select a 'default setting', as follows: P10 = 1 P15 = 12, (this is analogue control to terminals 3&4, and a run command to terminal 5). P10 = 0 Make terminal 5 high or connect to terminal 9, 24 volts internal. the speed will be relevant to terminals 3&4, 0 to 10 Volts. n.b. ensure terminals 28, 69, and 34 are all linked together.........
	Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on