Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Running Time Calculation of Motor in plc from display on HMI

Created by: KVS at: 6/4/2014 12:49 PM (16 Replies)

Rating (4)

Thanks 2

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

6/9/2014 4:57 PM	Rate (0)
KVS Regular Member Joined: 5/11/2013 Last visit: 10/12/2024 Posts: 31 Rating: (0)	Hi, project is completed and i dont have spare plc to simulate. S7 300 is quite different from 1200 and will try this on beckhoff twincat or codesys. I'll update soon and try to do it on s7 plc. Regards. vijayant

Suggestion To thank Quote Answer

6/11/2014 1:01 PM	Rate (2)
koenb Silver Member Joined: 6/26/2009 Last visit: 11/6/2024 Posts: 122 Rating: (23)	Hi , If I need to track running time , I always count time . Then i have a real value in hhhhh.mm as it should be on a real timecounter Easy to handle , display and modify ( synchronice with hardware ) koenb Attachment Timecounter.JPG (1358 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users rzuhair THOMPSONvk

6/11/2014 5:13 PM	Rate (0)
KVS Regular Member Joined: 5/11/2013 Last visit: 10/12/2024 Posts: 31 Rating: (0)	Hi. where to get 1HZ pluse input in s7 1200.

Suggestion To thank Quote Answer

6/11/2014 5:20 PM	Rate (1)
koenb Silver Member Joined: 6/26/2009 Last visit: 11/6/2024 Posts: 122 Rating: (23)	Hi , that is easy , just a setting in the PLC configuration. Attachment pulse config.JPG (757 Downloads)

Suggestion To thank Quote Answer

4/7/2020 7:08 AM	Rate (0)
simlenze Regular Member Joined: 2/20/2017 Last visit: 5/18/2024 Posts: 2 Rating: (0)	stu veut j 'ai une petit projet peut t'aider si tu veut contacte moi c'est calcule temps de marche machine en un temps bien defini:[snip] Attachment medboularess.pdf (558 Downloads)
	Last edited by: Jen_Moderator at: 04/07/2020 07:52:31 Removed E-Mail address.
Suggestion To thank Quote Answer

4/7/2020 7:25 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 11/7/2024 Posts: 34159 Rating: (4255)	Hello simlenze, this is a english speaking forum. Please be so kind and write your next posts in english. Thanks. Google translate stu want I have a small project can help you if you want to contact me it calculates machine running time in a well defined time: [contact data deleted]

Suggestion To thank Quote Answer

5/2/2022 2:37 PM	Rate (0)
THOMPSONvk Experienced Member Joined: 1/22/2018 Last visit: 10/22/2024 Posts: 31 Rating: (0)	koenb Hi , If I need to track running time , I always count time . Then i have a real value in hhhhh.mm as it should be on a real timecounter Easy to handle , display and modify ( synchronice with hardware ) koenb Nice solution. Very helpful. I added I0.0 in first net too, in series with M0.5 so i can count time only when the pump is ON. THOMPSONvk

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on