Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S110 and PM240-2

Created by: TechWing at: 9/7/2015 9:19 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

9/7/2015 9:19 AM	Rate (0)
TechWing Posts: 305 Rating: (1)	how can i Configuration the s110 and PM240-2 ？ in SCOUT ， i can not do it ，what is problem ？
TechWing Posts: 305 Rating: (1)	Last edited by: TechWing at: 9/7/2015 9:20:23 AM
Suggestion To thank Quote Answer

9/7/2015 9:54 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 3/21/2023 Posts: 5461 Rating: (735)	Hello TechWing, this configuration is available from FW 4.4 SP3 on: https://support.industry.siemens.com/cs/de/en/view/109474890 Check whether the FW 4.4 SP3 of S110 is installed in your Scout. If not you need to install the SSP.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

9/7/2015 10:15 AM	Rate (0)
TechWing Posts: 305 Rating: (1)	i via SCOUT 4.4.0.6 to set S110，install the SSP，i can see S110 V4.4.3，Configuation PM240-2 can not find。 V4.4_S110 after install ，it can not find the PM340 too。 Attachment NUP6RE~VSMTJ5RLI0`R`~HE.png (162 Downloads)
TechWing Posts: 305 Rating: (1)	Last edited by: TechWing at: 9/7/2015 10:17:40 AM
Suggestion To thank Quote Answer

9/7/2015 3:46 PM	Rate (0)
TechWing Posts: 305 Rating: (1)	is SCOUT V4.4.0.6 not support the CU305 + PM240-2？ only STARTER V4.4 support CU305 + PM240-2？
TechWing Posts: 305 Rating: (1)
Suggestion To thank Quote Answer

9/7/2015 4:08 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2819)	Hi, on my V4.4.0.6 install the CU305 + PM240-2 is supported after installing the SSP 4.4.3 for S110. ýou can try the following: plug the cu305 with FW 4.4 Sp3 on the PM240-2. Power on the system go online and upload the config do this works? Regards Christoph
	Last edited by: ChristophD at: 9/7/2015 4:09:05 PM
Suggestion To thank Quote Answer

9/8/2015 2:50 AM	Rate (0)
TechWing Posts: 305 Rating: (1)	SCOUT can not offline configuration CU305 PN + PM240-2 ，but it can online configuration it . is your meaning ? i want use SCOUT ,i buy CU305 + PM340 ,or change STARTER ,this is my idea .
TechWing Posts: 305 Rating: (1)
Suggestion To thank Quote Answer

9/8/2015 4:15 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2819)	Hello, no this is not the meaning. But with the online try you can check if the install is corrupted or not. Normaly th CU305 runs a macro at startup for the auto commissioning and then you can upload the configuration to the project. If you install is corrupted then you get some errors during the upload. Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on