Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5-S7 conversion

Created by: Shivaji Patil at: 4/20/2010 6:49 AM (3 Replies)

Rating (2)

Thanks 0

4 Entries

4/20/2010 6:49 AM	Rate (0)
Shivaji Patil Posts: 140 Rating: (1)	Dear All, I have Step5 Basic package Step5/ST Version 7.23 Installed on my Feild PG . I donot find the convertor for S5-S7 in this .Can any body say how to get this convertor ? Thanks in advance.
Shivaji Patil Posts: 140 Rating: (1)
Suggestion To thank Quote Answer

4/20/2010 7:00 AM	Rate (1)
fritz Diamond Expert Joined: 10/7/2005 Last visit: 10/4/2023 Posts: 2991 Rating: (1034)	Hello ShiRaPatil the S5 to S7 converter is part of Step 7 (you'll get it for "free" when you buy Step 7 and you will need Step 7 anyhow to "finish off" the converted S5 program). I hope this helps
	Cheers fritz The advice and opinion given in this thread is that of the author and does not necessarily reflect the views of I S Systems Pty Limited. To find out how I S Systems can help you with your automation needs please visit www.issystems.com.au.
Suggestion To thank Quote Answer

5/5/2010 1:24 PM	Rate (1)
Navnag Platinum Expert Joined: 11/21/2007 Last visit: 10/3/2023 Posts: 2321 Rating: (304)	Hi Pl look under : Start->SIMATIC->STEP7->Converting S5 Files Once you haveSTEP7 installed on your Field PG Cheers Navnag
	There is no such thing as the last bug in a program There are no stubborn bugs, There are only stubborn Debuggers.
Suggestion To thank Quote Answer

5/10/2010 10:48 AM	Rate (0)
Shivaji Patil Posts: 140 Rating: (1)	Thanks, I found it and started working with.
Shivaji Patil Posts: 140 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on