Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-200 and Protool Problem

Created by: gobrisa at: 5/15/2006 5:03 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/15/2006 5:03 PM	Rate (0)
gobrisa Posts: 2 Rating: (0)	Hello everybody I have a problem with Protool and a S7200 trying to communicate with a PC. I have configured my project in MicroWin and I can communicate with the PLC, but with the same configureations about adresses and speed, I can't communicate with Protool. I'm using a RS232/PPI Multimaster cable and as I can communicate with the S7-200 I think the configuration in Protool is OK. Please, help me Thank you
gobrisa Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/15/2006 9:04 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi gobrisa, perhaps this FAQ is helpfull??? http://support.automation.siemens.com/WW/view/en/5126815 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on