Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-300 convert Real to DINT Word

Created by: rlhsouth at: 8/16/2007 3:45 PM (2 Replies)

Rating (1)

Thanks 2

3 Entries

8/16/2007 3:45 PM	Rate (0)
rlhsouth Posts: 5 Rating: (0)	Need suggestions on example of how to convert a Real register into a DINT register in a S7 program.
rlhsouth Posts: 5 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users U_98ab1306-1f78-4...

8/16/2007 3:55 PM	Rate (1)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hi, Please have a look at Step7 online help. Here you find more information about: converters: - ROUND - TRUNC - CEIL - FLOOR Hope it will help. Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users JanMa1

6/18/2019 11:30 AM	Rate (0)
JanMa1 Experienced Member Joined: 4/20/2017 Last visit: 10/14/2024 Posts: 82 Rating: (6)	I was looking for same solution in TIA Portal 13 and that ROUND function is what I used.. Thank you Wizard Hi, Please have a look at Step7 online help. Here you find more information about: converters: - ROUND - TRUNC - CEIL - FLOOR Hope it will help. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on