Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-414-3DP PLC not showing any DP connected devices when upload

Created by: sunil0709 at: 1/1/2016 5:19 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/1/2016 5:19 AM	Rate (0)
sunil0709 Posts: 9 Rating: (0)	We have installed S7-414-3 DP PLC with drives and encoders , some IO modules . but when program is uploaded. It does not show any hardware connected to PLC. Actually this PLC is with 2 profibus connected . If somebody can help me out on this ? Attachment Capture.PNG (335 Downloads)
sunil0709 Posts: 9 Rating: (0)
Suggestion To thank

1/1/2016 8:18 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Please put the issue one time only. No need to publish the same more than one time. Thank you! Best regards, Hristo Mihalev

Suggestion To thank

1/2/2016 8:26 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/8/2024 Posts: 4111 Rating: (195)	closed cause discussion published twice. The second thread with the subject S7-414-3DP hardware in program not visible is published within the conference Decentral Peripherie Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on