Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S71200 analog input in source mode

Created by: Oscar_83PL at: 8/10/2012 3:06 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/10/2012 3:06 PM	Rate (0)
Oscar_83PL Bronze Member Joined: 10/22/2008 Last visit: 12/14/2022 Posts: 355 Rating: (5)	Hello, s71200 analog input measure current in loop in 0+ and 0-. It is possible to connect 0- to 0VDC and and analog transducer to 0+. In this configuration s71200 analog is in sink mode. However can I connect 0+ to 24VDC and 0- to sinking current transducer? best regards Attachment sink.JPG (452 Downloads)

Suggestion To thank Quote Answer

8/14/2012 12:56 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 3/24/2023 Posts: 4180 Rating: (1332)	Hi, some details are not clear to me: 1 - Witch Analog Input you will use? For Voltage or for Current? What is the order number of the module? 2 - What type of signal sends your transmiter? Voltage? Current 2 wire (passive)? Current 4 wire (active)?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/14/2012 12:59 PM	Rate (0)
Oscar_83PL Bronze Member Joined: 10/22/2008 Last visit: 12/14/2022 Posts: 355 Rating: (5)	some details are not clear to me: 1 - Witch Analog Input you will use? For Voltage or for Current? What is the order number of the module? Current input. 6es7231-4hd30-0xb0 2 - What type of signal sends your transmiter? Voltage? Current 2 wire (passive)? Current 4 wire (active)? current 4 wire.

Suggestion To thank Quote Answer

8/28/2013 3:59 PM	Rate (0)
beppexx80 Member Joined: 7/11/2011 Last visit: 9/12/2022 Posts: 1 Rating: (0)	Hello, I have the same problem, you have found a solution for the connection?

Suggestion To thank Quote Answer

8/28/2013 7:48 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 3/24/2023 Posts: 13205 Rating: (2147)	Oscar_83PL some details are not clear to me: 1 - Witch Analog Input you will use? For Voltage or for Current? What is the order number of the module? Current input. 6es7231-4hd30-0xb0 2 - What type of signal sends your transmiter? Voltage? Current 2 wire (passive)? Current 4 wire (active)? current 4 wire. Does the links in this threadanswer any of your questions? /tf/WW/en/Posts/67993 To me on first glance, it looks like trying to make the analog input source currentmay result in device destruction. That is what output devices do.
	science guy
Suggestion To thank Quote Answer

8/28/2013 10:13 PM	Rate (0)
Blue Moderator Moderator Joined: 4/21/2006 Last visit: 3/10/2023 Posts: 512 Rating: (24)	New question was transferred into a new thread: S71200 analog input problem.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on