Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7315-2PN/DP

Created by: Lucky123 at: 7/1/2009 3:18 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/1/2009 3:18 AM	Rate (0)
Lucky123 Gold Member Joined: 12/20/2008 Last visit: 8/12/2024 Posts: 556 Rating: (237)	Hi Everyone, What would I have to do in order to handshake the Bulk Data over ethernet, is there any way i can connect the additional ethernet module and send the data from one module and receive data from the CPU builtin Ethernet port. Will that increase speed or make the communication fast?

Suggestion To thank Quote Answer

7/1/2009 10:43 AM	Rate (0)
Valli Posts: 262 Rating: (45)	hi, your question is not clear........but i suggest you to refer the manual from below link. http://www.automation.siemens.com/download/internet/cache/3/1470033/pub/en/00_Gesamt.pdf
Valli Posts: 262 Rating: (45)
Suggestion To thank Quote Answer

7/2/2009 3:10 AM	Rate (0)
Lucky123 Gold Member Joined: 12/20/2008 Last visit: 8/12/2024 Posts: 556 Rating: (237)	Valli hi, your question is not clear........but i suggest you to refer the manual from below link. http://www.automation.siemens.com/download/internet/cache/3/1470033/pub/en/00_Gesamt.pdf My question is I have about 3000 Dint, 300 Floatwhich will keep going and coming from Simatic PLC to DCS, Will it be a good idea to read from CPU based Profinet, and write from another Profinet module?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on