Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7400H ET200M failsafe no hardware in catalog

Created by: picengineer123 at: 2/19/2009 7:43 PM (2 Replies)

Rating (1)

Thanks 0

3 Entries

2/19/2009 7:43 PM	Rate (0)
picengineer123 Posts: 95 Rating: (0)	Hello I searched the forums but couldn't find a similar post. I have Step7 V5.4 SP3. I am building the hardware for a redundant system. CPU is 412-3H. All IO are to be failsafe and ET200m. I have no trouble placint the IM153-2 for redundant systems on both profibus netorks. I need two racks for my IO system as you can only have 5 failsafe modules in a rack. Problem is I cannot find any failsafe IO in my catalog. I have updated it twice but still no modules. I have searched manually and used the search tool. Any ideas? Do I need to have the redundant step 7 add on? thanks John
picengineer123 Posts: 95 Rating: (0)
Suggestion To thank Quote Answer

2/22/2009 12:04 PM	Rate (0)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 9/9/2024 Posts: 4515 Rating: (839)	Hello, Please have a look on the attached screen shot. It shows that the Fail Safe modules are exist at the end of Standard modules folder With best regards, Attachment F modules.JPG (221 Downloads)
	Ayman Elotaify
Suggestion To thank Quote Answer

2/22/2009 6:18 PM	Rate (1)
jklm Platinum Member Joined: 12/22/2006 Last visit: 1/25/2022 Posts: 1742 Rating: (308)	Hello, Failsafe Modules are part of the F-Configuration pack. Please install it from here: http://support.automation.siemens.com/WW/view/en/15208817
	Best regards jklm Suggestion was helpful? Feel free to rate it.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on