Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

s7t config problem with the configuration

Created by: ram535 at: 1/19/2011 12:34 AM (14 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

1/19/2011 12:34 AM	Rate (0)
ram535 Posts: 11 Rating: (0)	Hi This are the components that i'm using: PS307 5A 307-1EA00-0AA0 CPU315T-2 DP 315-6TH13-0AB0 CP343-1 343-1EX30-0XE0 DI32xDC 24V321-1BL00-0AA0 DI16/D016xDC 24V323-1BL00-0AA0 CU320 6SL3040-0MA00-0AA1 Compact Flash V 2.06.02.05 Smart Line Module 6SL3430-6TE21-6AA0 Single Motor Output 18A6SL3420-1TE21-8AA0 Single Motor Output 3A6SL3420-1TE13-0AA0 Servo motor (X axi) 1FK7063-5AH71-1DH5 Servo motor (Z axi) 1FK7034-5AF21-1DH0 In the S7T Config I can start the servo motors from Drives/Servo_X/Commissioning/Control Panel with no errors(online ofcourse). Now it come the the tricky part when get online in S7T config and then download the information I can start the servo motor from Tecnologia/AXES/Axis_X/Control Panel/Assume control priority! with no errors but whe I clic in Give up control priority! in the alarm section appear some alarms: _{SIMATICS_S120_CU320: S_INF_021910:PROFIBUS:Setpoint timeout SIMATICS_S120_CU320: Servo_031910:PROFIBUS:Setpoint timeout SIMATICS_S120_CU320: Servo_031912:IF1:PB/PN clock cycle synchronous operation sign-of-life failure SIMATICS_S120_CU320: Servo_041910:PROFIBUS:Setpoint timeout SIMATICS_S120_CU320: Servo_041912:IF1:PB/PN clock cycle synchronous operation sign-of-life failure}and in the CU320 the LED RDY goes RED and the LED DP1 start flashing in GREEN. And if I try to start the servos again from the AXES it appear an alarm that says "There is a fault in the infeed!". The way I do to move the servo motor again with no erros it's going offline and then go online, download and then it's when I can start the servo motor but when i Give up control priority! it happen what I describe above. I don't know why I'm getting this erros. Any comment it's welcome. Thanks for the help.
ram535 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/19/2011 4:14 PM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 10/8/2024 Posts: 4739 Rating: (723)	I have no experience with S7T, but this behaviour I know from Scout. Can you acknowledge alarms?
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer

1/19/2011 4:58 PM	Rate (0)
ram535 Posts: 11 Rating: (0)	Hi Jacek Yes I can acknowledge all the alarms. The problem is when I download the information from SIMATIC Manager with no errors but in the CU320 the LED RDY goes RED and the OB1 start flashing in GREEN. I also did a small ladder program with a MC_Power, MC_Reset and MC_MoveVelocity to move my axis but in the MC_MoveVelocity appear the error 8040 and if try to reset from MC_Reset appear the same error 8040 (This error appear in the MC_MoveVelocity and MC_Reset). I still don´t know why this erros appear. Thanks for the help.
ram535 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/20/2011 11:04 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	http://support.automation.siemens.com/WW/view/en/18909567 Maybe this helps, don't know the T series, sorry
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

1/20/2011 1:51 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	Did you mark the synchonous/isochronePROFIBUS in HW-Config? What cycle times do you use in S7T Config (DP, Servo, IPO)? How/where did you conneced the PG to your system (MPI, DP-Drive, IE) ? Can you post your archived STEP 7 program? ram535 This is my scenario when I download from SIMATIC MANAGER seems to be everything fine because there appear no errors on the screen but the CU320 the LED RDY goes RED. Anyway I made I little program that include a MC_Power, MC_Reset and a MC_MoveVelocity just to try start my servo motors but appear an error in the MC_MoveVelocity (ErrorID 8040). I think it's because the CU320 got the LED REDY in RED. Check if the STATUS output of the MC_Power, if it'sfalse the axis is disabled and you get 8040 if you send a move command. If you have a drive fault, you can not enable the axis.
	Last edited by: miami at: 1/20/2011 1:57 PM
Suggestion To thank Quote Answer

1/20/2011 7:31 PM	Rate (0)
ram535 Posts: 11 Rating: (0)	Hi miami I check the status of the MC_Power an it's FALSE so the axi is disable like you said. I couldn't find the option of synchonous/isochronePROFIBUS in HW-Config. The System Cycles Clocks: Bus cycle clock 3 ms Servo 3 ms IPO 9 ms IPO_2 18ms In the beginning the communication of the PG with the system was via MPI but then the CP 343-1 was set up in the system an now the communication is via ethernet. The CPU communicates with the CU320 via profibus. I can't send you my The STEP 7 program because is 4.7MB and this forum won't let me. can I send it to you via mail? Thanks for the help.
ram535 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/21/2011 10:33 AM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	ram535 I couldn't find the option of synchonous/isochronePROFIBUS in HW-Config. Look here (steps 9 and 10) for the master settings,try to use 3 ms as constand cycle time. Andlookhere (step 5) for the drive settings. ram535 I can't send you my The STEP 7 program because is 4.7MB and this forum won't let me. Can I send it to you via mail? I send you my email adress in a private message.

Suggestion To thank Quote Answer

1/21/2011 4:48 PM	Rate (0)
ram535 Posts: 11 Rating: (0)	Hi dirk I check the document that you send me and I got it like in the document even the 3ms as constant cycle time. Thank a lot for your help.
ram535 Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

1/21/2011 4:59 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	ram535 Hi dirk I check the document that you send me and I got it like in the document even the 3ms as constant cycle time. Thank a lot for your help. Sorry I'm not shure: Did you had itlike in the manual or did you changed it, afterreading my post (and the manual)?

Suggestion To thank Quote Answer

1/21/2011 5:03 PM	Rate (0)
ram535 Posts: 11 Rating: (0)	I had it like in the manual before reading your post Attachment Proyecto.zip (289 Downloads)
ram535 Posts: 11 Rating: (0)	Last edited by: O_Moderator at: 1/24/2011 7:49 AM file from previous post now uploaded Last edited by: ram535 at: 1/21/2011 5:04 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on