Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sample Program: Modbus TCP with S7-1500

Created by: Denilson Pegaia at: 10/2/2013 12:24 PM (35 Replies)

Rating (11)

Thanks 25

Result pages:: |; 1 | 2 | 3 | 4; |

36 Entries

Entries per page: 10 | 20 | all

4/13/2018 4:54 AM	Rate (0)
Macro password Posts: 1 Rating: (0)	Hai Denilson, As i tried to open the Modbus TCP with S7-1500 TIA V14 but i can't open so please help me how to open that TIA V13 file on TIA V14 software.
Macro password Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/28/2018 3:38 PM	Rate (2)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, sorry but I don't have a V13 version of it. Anyway, Here there are a V15 version of a demonstration program and casts showing about how it was created. The project uses S7-1500 (but the configuration is similar to S7-1200). The use of S7-1500 has the advantage to be simulated in PLCSIM Advanced. The casts could be used as basis to build a project from zero. Attachment MODBUS.zip (2431 Downloads)
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer
This contribution was helpful to 5 thankful Users Joe S olejacosor PetSve coskon Strini

8/7/2018 10:55 PM	Rate (0)
rojasalmut2 Regular Member Joined: 8/18/2015 Last visit: 4/13/2023 Posts: 5 Rating: (1)	Hi, with the internet examples, I made an example project between two s7-1200 (one as a server and the other as a client) maybe it can help you. use version 14 of the TIA PORTAL, CPUs with firmware version 4.2 and MODBUS instructions V4.1. The blocks were without optimized access. regards Attachment TestModbusClient_1_20180807_1549.zip (1320 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator zdfhsadgzx

8/7/2018 11:00 PM	Rate (1)
rojasalmut2 Regular Member Joined: 8/18/2015 Last visit: 4/13/2023 Posts: 5 Rating: (1)	rojasalmut2 Hi, with the internet examples, I made an example project between two s7-1200 (one as a server and the other as a client) maybe it can help you. use version 14 of the TIA PORTAL, CPUs with firmware version 4.2 and MODBUS instructions V4.1. The blocks were without optimized access. regards attachment video example... Attachment Modbus TCP S7-1200 Exe.zip (1147 Downloads)
	Last edited by: rojasalmut2 at: 8/7/2018 11:16:48 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

1/17/2019 10:59 AM	Rate (0)
LeoArul Member Joined: 12/8/2015 Last visit: 4/21/2021 Posts: 2 Rating: (0)	Hi, Hope the attached program backup would help.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ASHISHJ

10/15/2019 9:18 AM	Rate (0)
ArunPManuel Regular Member Joined: 9/9/2018 Last visit: 4/2/2024 Posts: 13 Rating: (0)	TomEPE Hi, I tried this sample program and am having a few issues on TIA portal Pro v13 with a S7-1516-3 PN/DP, firmware v1.1.2. The s7-1500 PLC is a Modbus client and so I am only using "MB_CLIENT_DB". 1) MB_DATA_PTR didnt accept a struct as in your example, "MB_CLIENT_DB".STATUS = error 818B: "The MB_DATA_PTR parameter has an invalid pointer." However, no complain with an array[0..2] of Int. 2) if Client_Send_DB.InterfaceId is < 64, "MB_CLIENT_DB".STATUS = error 809B: "The element InterfaceId within the TCON_xxx structure does not reference a hardware identifier of a CPU or CM/CP interface or has the value "0"." 3) if Client_Send_DB.InterfaceId is >= 64, "MB_CLIENT_DB".STATUS = error 8086: "The ID parameter is outside the valid range." Those 2 last errors are not specifique to MODBUS (TCP) but to TCON for S7-1200/S7-1500. As I understood, I need to set InterfaceId with the Hardware Identifier of the PLC port used to communicate with the Modbus Master. In this case, the ethernet cable is connected to Port[X1 P1 R], which has a Hardware Identifier = 65, as seen in the following screenshot: http://i.gyazo.com/4916e839cd260cc5cc3fe7f3d6ca58cd.png I also attached my sample project to this post for info. Hello, Were you able to solve this issue!? If yes, I would like to know how you succeeded. I am facing the same issue here. Thank you.

Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4; |

36 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on