Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sample Program: S7-1500 Data Log

Created by: Denilson Pegaia at: 3/20/2013 1:11 PM (15 Replies)

Rating (0)

Thanks 4

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

3/26/2014 11:08 AM	Rate (0)
Peter cowman Posts: 10 Rating: (0)	HI BDNNN It will not let me upload the file. All i did was add a number to the name string using the concat function. and i incremented the number when needed and the problem was solved. i did try to send. Regards Cowmanator
Peter cowman Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

3/27/2014 2:57 PM	Rate (0)
BDNNN Posts: 5 Rating: (0)	Hello Cowmanator, I succesfully used the concat block. But I have some troubles converting the number (INT) to a string. I use the S_CONV block. the result is a string of the int with some spaces before the number. And the datalogcreate block doesnt accept names with spaces in :/ Your project might be helpful. Did you try to archive your project and then zip it (winzip)? It should be possible to upload the zipfile. Kind regards, Bruno
BDNNN Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/28/2014 4:29 PM	Rate (0)
BDNNN Posts: 5 Rating: (0)	Hello, Thank you for your help! It works now :) Kind regards, Bruno
BDNNN Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/24/2015 8:22 AM	Rate (0)
Dutch_Johnny Posts: 7 Rating: (0)	Hello Pegaia, Many thanx for your program, it helped me a lot! For now I have 1 question left, how many records can I assign to the 'DataLogCreate' block? The 'Records' tag is a UDint, that means more then 4 billion. But when I assign more then 32000 records the block just dont execute when I put an logic 1 on the REQ input. I also dont give an error nor status (7000). I could upload the program but its just the same as you made, I only created a different trigger to close the datalog. Thanx in advance! Johnny
Dutch_Johnny Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

11/11/2015 5:59 PM	Rate (0)
AutoGen_1041894 Posts: 1 Rating: (0)	Hello Denilson, I have TIA Portal V13. And I can not open the sample program of data logging. Could you send that suitable for V13? Thank you.
AutoGen_1041894 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/31/2019 10:25 AM	Rate (0)
josejack Member Joined: 5/22/2016 Last visit: 10/18/2023 Posts: 2 Rating: (0)	I Have used your program to create a Datalog in TIA V15 and PLCSIM ADVANCED V2. It works fine, becouse I can see in monitoring Datalogocreate, 1 number of done and a increased number in monitoring Datalogwrite. But I can see the file datalog through the webserver. Do you have any clue? Attachment 2019-03-31_10h18_41.png (344 Downloads)
	Last edited by: josejack at: 3/31/2019 10:27:50 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on