Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Saving Alarm Events on TP177B

Created by: Sparkle at: 12/9/2010 10:22 AM (13 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

11/26/2013 6:49 PM	Rate (0)
Gerdoo Posts: 23 Rating: (2)	Hey Sparkle, In manual TP177B (9.1.1)has been mentioned that "Alarm events are saved to an internal, volatile buffer.". Other than that, normally with standard panel series, if the panel is capable of logging you need an SD card in the memory slot to handle that. Cheers
Gerdoo Posts: 23 Rating: (2)
Suggestion To thank Quote Answer

11/26/2013 7:52 PM	Rate (0)
YvonV Posts: 29 Rating: (0)	Thanks for the repy, I have confirmed that there was a memory card loaded in the unit. Yvon
YvonV Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

11/27/2013 7:57 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/1/2023 Posts: 8596 Rating: (1139)	Hello YvonV, Are you showing the Alarm buffer. Or are you looking at the active alarms? Please use a AlarmView , go to properties and use "Alarm events" Best regards, Wizard

Suggestion To thank Quote Answer

11/27/2013 12:06 PM	Rate (0)
YvonV Posts: 29 Rating: (0)	Ah, ok... thank you YvonV
YvonV Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on