Scale 4-20mA

Hello.

I have an SM 1234 AI/AQ analog module and a HMI KTP600 basic color PN. I wondering witch values I have to input on "OUT", "VALUES", "MIN" and "MAX" (I am using Scale_X in TIA Portal V11). I am going to use and tag a barometer in my HMI, to read the 4-20mA signal and show me the value on the HMI screen. What am I going to do?

dear mrpaiva,

i have same question,

please share the this link again or help for this issue

jayleela

dear mrpaiva,

i have same question,

please share the this link again or help for this issue

..if you ever have a problem that you need to read
a "legacy" forum post >>

MrPaiva

Hello Bergmantown,

Take a look at this thread:
https://www.automation.siemens.com/BR/tf/WW/en/Posts/67810#top

{https://support.industry.siemens.com/tf/ww/en/posts/} & {nr}

https://support.industry.siemens.com/tf/ww/en/posts/67810

Helpful?
w

Attached a scaling block 0..20 mA, 4..20 mA, 0..10V, 2..10 V.