Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SCL function blocks

Created by: Import-User-1 at: 4/11/2011 4:36 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/11/2011 4:36 PM	Rate (0)
Import-User-1 Gold Member Joined: 8/10/2005 Last visit: 2/7/2022 Posts: 3609 Rating: (28)	Import of a Technical Question of a User pushly Hello! I do have a problem here and I woul be grateful if you can help me.I have created a FB which calculates the maximum value in a 2d array. How can i insert the array as an input in the ob1? Do i have to convert it to another type or there is a direct way to do so? Thanks

Suggestion To thank Quote Answer

4/11/2011 5:12 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 6/2/2023 Posts: 6803 Rating: (1345)	Hi You can use starting point of 2D array as input of FB.Check structure of ANY pointer structure for accessing proper area of data. regards
	Demo Channel on Youtube
Suggestion To thank Quote Answer

4/12/2011 11:58 AM	Rate (0)
Chilly_Garfield Posts: 316 Rating: (37)	Hi, I would make a loop with a compromise. The input parameter will be a ANY pointer. This anypointer you move, with "blkmov", into a data area you will compare(you can use FC25 "MAX"). Then you point the pointer on the next value and starts again in the loop.
Chilly_Garfield Posts: 316 Rating: (37)
Suggestion To thank Quote Answer

4/12/2011 12:20 PM	Rate (0)
NastasaM Bronze Member Joined: 4/4/2011 Last visit: 3/24/2023 Posts: 65 Rating: (10)	thank you! I did it!
	Learn, unlearn, relearn...
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on