Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sentron PAC 3200 remote digital output write

Created by: kbaser at: 6/30/2021 11:17 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

6/30/2021 11:17 AM	Rate (0)
kbaser Posts: 3 Rating: (0)	hello, does anyone know how / which address to WRITE to set the digital output terminal remotely? I set by 50035 bit:2 for remote output. But offset 207 is only for READ access, is there any WRITE access for DO terminal ? thanks alot
kbaser Posts: 3 Rating: (0)	Last edited by: kbaser at: 06/30/2021 11:17:36
Suggestion To thank Quote Answer

6/30/2021 12:38 PM	Rate (0)
kbaser Posts: 3 Rating: (0)	found 60008 addresses for digital output, and works ..done
kbaser Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Follow us on