Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Servo drive with synchronous motor - regulator optimization

Created by: kapa24 at: 5/21/2014 10:17 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/21/2014 10:17 AM	Rate (0)
kapa24 Posts: 8 Rating: (0)	Hello, i was wondering if anybody knows some kind of optimization procedure for current and speed regulators in servo drive using synchronous machine? Any help would be very much appreciated :) Best regards, Skocko
kapa24 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

5/21/2014 5:56 PM	Rate (0)
metwally mustafa Silver Member Joined: 10/10/2010 Last visit: 10/25/2024 Posts: 307 Rating: (15)	you can check the manual of the drive ( SINAMICS or masterdrive ), you will find details about motor data identification, control loop and tunning parameters for regulation , you will find the way if basic positioner and advanced examples

Suggestion To thank Quote Answer

5/23/2014 7:51 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/18/2024 Posts: 5941 Rating: (816)	Hello, here you can find a very good document regarding controller optizimation. http://support.automation.siemens.com/WW/view/de/60593549 Note: it's only for Siemens colleagues. Otherwise please contact your regional Siemens contact person.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on