Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Several 'devices' in the same Win CC Flex project.

Created by: Import-User-1 at: 10/14/2005 1:58 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/14/2005 1:58 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	Topic was posted in the "german" Forum [quote user="JesperMP"]Hi all. I want to work with two projects at the same time in order to cut-and-paste between the two. With Protool it was no problem to just open two projects at the same time. In Win CC Flexible only one project can be opened. I can then have several devices at the same time in one project. But I can only create a new device, I cannot import an existing device (an existing Protool or Win CC Flex project), at least I cannot find any function to achieve that. How can I work with two projects at the same time ? Or, alternatively, how can I import an existing project (device) into another project ? Thanks.
Import-User-1 Posts: 3609 Rating: (29)	Last edited by: Import-User-1 at: 10/14/2005 1:59 PM
Suggestion To thank Quote Answer

10/14/2005 2:12 PM	Rate (0)
@JesperMP Posts: 54 Rating: (5)	Answering my own question: It is possible to open two instances of Win CC Flex. Opening one project in each instance allows you to cut-and-paste between the two projects. I have a 1 GB PC, and almost no resources are left when I do that, but it gets the job done. NB: I see that the moderator has moved this to here from the german forum. Hmmmm... So the new forum is segmented into languages ! It is allready segmented into products, which is not so smart if a question falls into several categories or outside the most typical categories. To segment it further into languages is a very very bad idea methinks.
@JesperMP Posts: 54 Rating: (5)
Suggestion To thank Quote Answer

10/14/2005 3:48 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 8/12/2024 Posts: 4104 Rating: (194)	Hello JesperMP, thank you for your feedback. We see a requirement for a german spoken forum. A lot of our Users are german spoken. So they should have the possibility to discuss there problems in german. If there will be a requirement, we will establish forums in other languages too. You are right. Sometimes it is difficult to decide which conference is the right to post a topic. But you have seen, it is no problem for us to move a topic [;)]. Maybe there is a requirement for a general conference. We will see. Best regards from CS_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

10/17/2005 10:51 AM	Rate (0)
@JesperMP Posts: 54 Rating: (5)	Thanks for replying to my complaints. Just to explain: Of course people may post in their native language. But that can be done in the same forum no need to split it up. Here is an example: Imagine a conference with people from many countries. Some will talk german between each other, and some will speak english between each other, but maybe an english speaking persons will like to listen to or talk to a german speaking person too. Somebody doesnt speak german, and somebody doesnt speak english, but thay can still be in the same room. Imagine if the conference organisers asked the english speaking people to gather in room 1, the german speaking people to gather in room 2, the french speaking in room 3 etc.. You get the idea :)
@JesperMP Posts: 54 Rating: (5)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on