Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SF Fault during machine running

Created by: Kalokhe Sagar at: 12/9/2014 9:09 AM (3 Replies)

Rating (0)

Thanks 1

4 Entries

12/9/2014 9:09 AM	Rate (0)
Kalokhe Sagar Posts: 11 Rating: (0)	Resp Sir Regarding SF fault, We have s7-312 CPU with two remote i/o station, In that we are facing SF fault on main CPU at AUTO cycle running at perticuler same operation. machine is running without intruption, but may be it will create big problem in future. So what we can do for this. Thanks & Regards Sagar K.
Kalokhe Sagar Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

12/9/2014 9:51 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/12/2024 Posts: 8768 Rating: (1171)	Hello, Please have a look in Diagnostic Buffer. Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users olloy

12/9/2014 9:52 AM	Rate (0)
olloy Silver Member Joined: 8/27/2010 Last visit: 4/13/2024 Posts: 417 Rating: (37)	Hi! You should check contents of diagnostics buffer and in case you have questions, read help on event. Otherwise, post diagnostics buffer here for someone to evaluate.

Suggestion To thank Quote Answer

12/9/2014 1:23 PM	Rate (0)
eisenpferdreiter Posts: 1058 Rating: (93)	In addition to diagnostic buffer, a picture of your HW-configuration would be helpful for analysis. Regards
eisenpferdreiter Posts: 1058 Rating: (93)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on