Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SFB20 "STOP": parameter ID?

Created by: _Tarzan_ at: 6/3/2013 10:56 AM (3 Replies)

Rating (3)

Thanks 6

4 Entries

6/3/2013 10:56 AM	Rate (0)
_Tarzan_ Posts: 6 Rating: (0)	Hi, I try to insert SFB20 "STOP" in my program to stop my CPU (for a test). Which value is needed in parameter "ID"? The documentation is not good. Thanks! Steven
_Tarzan_ Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

6/3/2013 11:56 AM	Rate (1)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	Hello, ID is the communication iD of the remote PLC, you can find it in netpro. Regards, Marcjan Attachment id.JPG (496 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users hdhosseini nunobnk EasilyLost

6/3/2013 12:03 PM	Rate (2)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/24/2023 Posts: 6821 Rating: (1349)	_Tarzan_ Hi, I try to insert SFB20 "STOP" in my program to stop my CPU (for a test). Which value is needed in parameter "ID"? The documentation is not good. Thanks! Steven Hello, for stopping the CPU you are working, of course for test, you can try SFC46 "STP".In case of SFB20,You use to stop a remote device on network and it is common to define "ID" while defining communication partners.The documentation is clear in this case. Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users _Tarzan_ nunobnk

6/3/2013 12:29 PM	Rate (0)
_Tarzan_ Posts: 6 Rating: (0)	Hello Hamid Hosseini, THANKS!!! This is the correct function. Steven
_Tarzan_ Posts: 6 Rating: (0)	Last edited by: _Tarzan_ at: 6/3/2013 12:29 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on