Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SFC chart block icon

Created by: Testermax at: 10/14/2009 9:01 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

10/14/2009 9:01 PM	Rate (0)
Testermax Posts: 159 Rating: (3)	Hello! Is there any way to prevent OS compile from derriving SFC block icons from SFCs, except unchecking the "Transfer chart to OS..." and unchecking the "SFC visualisation"? I`ve tried disabling the "Transfer..." setting in SFC editor but the block icon still gets derrived during OS compile. Cant find any info on how to prevent this, if its is possible to prevent this that is?
Testermax Posts: 159 Rating: (3)
Suggestion To thank Quote Answer

10/14/2009 11:58 PM	Rate (1)
Phantom75 Posts: 2661 Rating: (279)	Hi TesterMax, Both settings ("SFC Visualization" in OS compile wizard and "Transfer chart to OS for visualization" in SFC properties OS tab) are meant for transfer of SFC chart to OS and nothing to do with creation of SFC block icon. Even with both settingsunchecked the SFC block icons will still get placed on the picture (especially in V7.0 and above). One way to "trick" the system is to remove these icons from the @PCS7Typicals (and store somewhere else) and manually place the icons for only the SFC's you want to show on the screen. Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

10/15/2009 7:23 AM	Rate (0)
Testermax Posts: 159 Rating: (3)	Hi Phantom75 Ok, that sounds like an fair enough method, but I really whish that this feature should be built in PCS 7 in the next version . Thanx for the trick
Testermax Posts: 159 Rating: (3)
Suggestion To thank Quote Answer

10/16/2009 9:48 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	Actually prior to V7.0 there was an option "Generate Block Icons". I cannot still figure out why this option was done away with! Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on