Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SFC transition inactive

Created by: Fpinheiro at: 3/14/2014 7:31 PM (4 Replies)

Rating (0)

Thanks 1

5 Entries

3/14/2014 7:31 PM	Rate (0)
Fpinheiro Posts: 9 Rating: (0)	Hi all, I have a problem in my process. The Start action is active, but the next transition is inactive and the processdoesn't go further the "START" action block. Why all transitions are inactives? Why the buttons (stop, hold, etc) are disable? Attached the picture. Ty Felipe Attachment SFC stoped.jpg (53 Downloads)
Fpinheiro Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

3/15/2014 10:43 AM	Rate (0)
Avinashkrishna Posts: 62 Rating: (4)	Dear Fpinheiro, Please Check Whether the Enstart,Enstop,enresume Bits are high.these Buts will block the access to operate stop ,about,resume. or check the start conditions for your Sequence. Regards, Avinashkrishna Bh.
Avinashkrishna Posts: 62 Rating: (4)
Suggestion To thank Quote Answer

3/17/2014 1:41 PM	Rate (0)
Fpinheiro Posts: 9 Rating: (0)	Avinashkrishna Dear Fpinheiro, Please Check Whether the Enstart,Enstop,enresume Bits are high.these Buts will block the access to operate stop ,about,resume. or check the start conditions for your Sequence. Regards, Avinashkrishna Bh. Hi Avinashkrishna, The Enstart, Enstop, Enresume Bits are high. There is no conditions in START. Ty
Fpinheiro Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

3/19/2014 4:06 PM	Rate (0)
Fpinheiro Posts: 9 Rating: (0)	anything more to test?
Fpinheiro Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

3/25/2014 3:03 PM	Rate (0)
Fpinheiro Posts: 9 Rating: (0)	Problem Solved. Download all and the SFC worked again. TY
Fpinheiro Posts: 9 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users jumo

|

Share this page:

Share this page on...

Follow us on