Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SFC Type, how control it

Created by: irb6 at: 4/28/2008 11:41 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/28/2008 11:41 AM	Rate (0)
irb6 Bronze Member Joined: 3/15/2008 Last visit: 11/21/2024 Posts: 106 Rating: (1)	Hi, Ihave to control my SFC type in CFC chart, how can I start, stop, hold...etc my sequence by block inputs' in manual mode?Is theresomeone who can tell mehow use sfc_control wordfor control thisblock from WinCC? Maybe someone has better solution to solve my problem? Regards
	Best regards Kamil Jastrzębski
Suggestion To thank Quote Answer

4/29/2008 5:13 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	irb6: Can you describe your problem in some more detail? Are you having problems with creating an SFC type? Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/29/2008 8:41 AM	Rate (0)
irb6 Bronze Member Joined: 3/15/2008 Last visit: 11/21/2024 Posts: 106 Rating: (1)	I've already solved my problem... Thanks
	Best regards Kamil Jastrzębski
Suggestion To thank Quote Answer

4/29/2008 9:30 AM	Rate (0)
Dorftrottel? Silver Member Joined: 8/10/2006 Last visit: 8/13/2024 Posts: 298 Rating: (29)	Yes, here in America, if you show up with a bucket of KFC, SFC's and CFC's should start to behave - like the beggars on the street corner, holding the placard that says, "will work for food."

Suggestion To thank Quote Answer

5/1/2008 11:29 PM	Rate (0)
irb6 Bronze Member Joined: 3/15/2008 Last visit: 11/21/2024 Posts: 106 Rating: (1)	Nice joke... Here, in Europe we solve problems in different way than you in US
	Best regards Kamil Jastrzębski
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on