Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SICAM PASS ALARM MESSAGES

Created by: Eng.Abdo at: 11/26/2011 9:22 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/26/2011 9:22 AM	Rate (0)
Eng.Abdo Posts: 99 Rating: (0)	Dear all i am trying to import alarm messages from SICAM PAS V7 "pxd file" in WinCC V7. once the import process done, the tags is generated but alarm login is showing no messages. note alarm messages were configure in SICAM PAS. please advise REGARD
Eng.Abdo Posts: 99 Rating: (0)
Suggestion To thank Quote Answer

11/26/2011 1:23 PM	Rate (0)
ensark2 Bronze Member Joined: 11/18/2009 Last visit: 6/4/2024 Posts: 262 Rating: (18)	Can you attach your PXD file here? I wouldtry to import.

Suggestion To thank Quote Answer

11/28/2011 1:08 PM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 9/18/2024 Posts: 1249 Rating: (115)	Hi Did you install Update 2 for WinCC 7.1 SP2? Mike
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SICAM

Follow us on