Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siemens S7-1214C Compatibility with 3RK Modules

Created by: karl_smith77 at: 9/13/2024 1:41 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/13/2024 1:41 PM	Rate (0)
karl_smith77 Joined: 7/4/2024 Last visit: 12/15/2024 Posts: 43 Rating: (0)	Hello everyone, I am currently working on a project using a Siemens S7-1200 PLC (reference: 1214C DC/DC/DC - 6ES7 214-1AG40-0XB0), and I would like to know if it is compatible with the module 3RK72443-2AA30-0XB0. My goal is to establish communication between this setup and the module 3RK1400-1DQ00-0AA3. I am wondering if this configuration is feasible and if there are any specific points to consider to ensure proper communication between these modules. Thanks in advance for your advice!

Suggestion To thank Quote Answer

9/13/2024 2:35 PM	Rate (0)
JimHalpert Joined: 7/11/2024 Last visit: 12/30/2024 Posts: 85 Rating: (9)	Hello Karl, You should check the system requirements of AS-i Master: CPU firmware version V2.2 or higher STEP7 Basic or Professional V11 + Service Pack 2 STEP 7 Hardware Support Package (HSP) for CM 1243-2 https://support.industry.siemens.com/cs/ww/en/view/57424643 Good luck!
	If this post has been useful, don't forget to rate it!😊
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on