Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIMATIC STEP 7 License Activation

Created by: blondinb at: 10/10/2018 6:04 PM (4 Replies)

Rating (2)

Thanks 0

5 Entries

10/10/2018 6:04 PM	Rate (0)
blondinb Posts: 3 Rating: (0)	Hello People, I have a problem. I got a gift from a friend ( Siemens LOGO! 12/24 RCE KIT ) including also software - SIMATIC STEP 7 Basic/Professional ( DVD 1/2 ) - SIMATIC WinCC Basic/Comfort/Advanced V15 ( DVD 1 ) - SIMATIC WinCC Legacy Panel Images V15 ( DVD ) - LOGO! Soft Comfort ( DVD ) - My problem is that I installed TIA Portal but have no License key for activating SIMATIC STEP 7 , the only license key I have in the package is a usb stick consisting of WinCC license . - Could it be that my package doesnt include license for STEP 7 or that I lost the license USB or DVD for STEP 7. Best regards to everyone.
blondinb Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/10/2018 6:45 PM	Rate (1)
miami Platinum Member Joined: 8/31/2005 Last visit: 11/13/2024 Posts: 2198 Rating: (328)	If you have the "Certificate of License * " any licence can be restored. Use the Support Request and enter STEP 7. In the 2nd Step (product range) make sure to check "Problem with SIMATIC authorization/license" at the end of the Product list. Follow the dialog. * see https://support.industry.siemens.com/tf/ww/en/posts/certificate-of-license/129915?page=0&pageSize=10 e

Suggestion To thank Quote Answer

10/10/2018 6:52 PM	Rate (1)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 11/19/2024 Posts: 34240 Rating: (4263)	blondinb [snip] I got a gift from a friend ( Siemens LOGO! 12/24 RCE KIT ) including also software - SIMATIC STEP 7 Basic/Professional ( DVD 1/2 ) - SIMATIC WinCC Basic/Comfort/Advanced V15 ( DVD 1 ) - SIMATIC WinCC Legacy Panel Images V15 ( DVD ) - LOGO! Soft Comfort ( DVD ) [snip] For programming the LOGO! you need no STEP7 and no licence. Only LOGO!Soft Comfort install from DVD, it's a full Version and Need no licence.

Suggestion To thank Quote Answer

10/12/2018 2:48 AM	Rate (0)
blondinb Posts: 3 Rating: (0)	Thank you very much for your reply, I did send a request , I'm waitinf for answer
blondinb Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/12/2018 2:49 AM	Rate (0)
blondinb Posts: 3 Rating: (0)	Yes I know about Logo programing but I needed Step 7 for a S7-1200 , thank you very much
blondinb Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on