Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simatic WinCC flexible - String in I/O field

Created by: SeH at: 6/30/2011 10:42 AM (3 Replies)

Rating (0)

Thanks 2

4 Entries

6/30/2011 10:42 AM	Rate (0)
SeH Posts: 2 Rating: (0)	I'm trying to write a string of 15 characters from a DB (the variable has type STRING[15]) to an I/O field in WinCC flexible. My problem is that I can only see the first two characters in the I/O field. I've put the format type of the I/O field to string and the length to 15. Anyone know what's wrong?
SeH Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/30/2011 1:48 PM	Rate (0)
Sandman Platinum Member Joined: 4/29/2010 Last visit: 8/12/2024 Posts: 1557 Rating: (161)	Hello, so your tag in flexible is a string, lenght of the tag is 15; the I/O-field is set also so lenght 15 (and you see 15 zeros at the projecting in flexible)? best regards.

Suggestion To thank Quote Answer

6/30/2011 1:49 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/10/2024 Posts: 8736 Rating: (1167)	Hello, Have you seen this thread: /tf/WW/en/Posts/53730 Best regards, Wizard

Suggestion To thank Quote Answer

6/30/2011 2:01 PM	Rate (0)
SeH Posts: 2 Rating: (0)	After debugging for quite some time I finaly figured out that the problem was earlier i the SCL code. I've managed to solve it now. Thanks anyway for helping
SeH Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Wizard O_Moderator

|

Share this page:

Share this page on...

Follow us on