Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simotion Alarm transfer to HMI using Device Proxy

Created by: Kripaharan at: 11/8/2018 6:36 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/8/2018 6:36 AM	Rate (0)
Kripaharan Posts: 66 Rating: (0)	Hi Experts, I am using 3 Simotion D410-2 controllers as I device and 1515-2 PN PLC and master. I am using KTP700F HMI in my project. I have created separate Device proxy for all 3 Simotion controllers only for PLC alarms. I had created HMI connections to Device proxy also. But i couldn't find any alarm in the HMI even when the Simotion controller is in alarm state. Is there any alarm list need to be created or configured? Please guide me.
Kripaharan Posts: 66 Rating: (0)
Suggestion To thank Quote Answer

11/9/2018 12:47 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/18/2024 Posts: 5941 Rating: (816)	Hello, general info: WinCC https://support.industry.siemens.com/cs/ww/en/view/62121503 WinCC Flexible https://support.industry.siemens.com/cs/ww/en/view/24037531
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on