Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Simple logic programming in WinCC for Compfort panel TP2200

Created by: MadCat at: 7/1/2014 12:52 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/1/2014 12:52 PM	Rate (0)
MadCat Regular Member Joined: 9/6/2012 Last visit: 2/19/2022 Posts: 25 Rating: (0)	Just a question: Is it possible to program small gogic functions in WinCC v13? I was thinking to use a simple logic to generated a color change of lines. FX: A Valve01 A Pump01 = ExitPump01 and so on and on.I would like to "animte" the flow in the pipe system, so that the operator has an overview of the flow or in case of an fault, can easiely identify the problem (no color change after trouble spot). I could do it in VBA but I think and hope that there should be an easier solution. Thanks alot for the help!

Suggestion To thank Quote Answer

7/1/2014 3:41 PM	Rate (0)
Jens_app Gold Member Joined: 1/5/2011 Last visit: 6/15/2024 Posts: 815 Rating: (123)	MadCat Just a question: Is it possible to program small gogic functions in WinCC v13? I was thinking to use a simple logic to generated a color change of lines. FX: A Valve01 A Pump01 = ExitPump01 and so on and on.I would like to "animte" the flow in the pipe system, so that the operator has an overview of the flow or in case of an fault, can easiely identify the problem (no color change after trouble spot). I could do it in VBA but I think and hope that there should be an easier solution. Thanks alot for the help! Hello, Like you suggested VB scripting will do the trick, if you are looking for an easier solution you can let your plc take care of those smaller logic operations (and use the output tags in your hmi). Note that too much scripting will slow down your hmi. Kind regards, Jens
	Keep it simple and on-topic. A simple straight-to-the-point answer is often of more quality than a complicated one.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Murof

5/2/2016 9:53 AM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 11/7/2024 Posts: 1024 Rating: (14)	New question published by Shahjee is split to a separate thread with the subject Displaying all the faults at the same time because I am putting text over each other. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

5/11/2016 1:30 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Shahjee is split to a separate thread with the subject Display Integer giving me hash. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on