Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics Capacitor reforming

Created by: Indian3675 at: 10/2/2016 6:25 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

10/2/2016 6:25 AM	Rate (0)
Indian3675 Posts: 3 Rating: (0)	Hi everyone, Please let me know, how to restart 500KW Sinamics drive after three years storage. It CU card is S120. Input and output voltage 690V AC. Application 450T crane. What is the procedure to protect capacitors from blasting after a long time storage in yard. Plus others precautions. Thanks!
Indian3675 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/2/2016 9:59 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 3/13/2023 Posts: 4617 Rating: (700)	Indian3675 Hi everyone, Please let me know, how to restart 500KW Sinamics drive after three years storage. It CU card is S120. Input and output voltage 690V AC. Application 450T crane. What is the procedure to protect capacitors from blasting after a long time storage in yard. Plus others precautions. Thanks! Hello, have you already seen this: https://support.industry.siemens.com/tf/ww/en/posts/capacitor-forming-in-sinamics-s120/97321/?page=0&pageSize=10

Suggestion To thank Quote Answer

10/2/2016 5:56 PM	Rate (0)
Indian3675 Posts: 3 Rating: (0)	Thanks for your reply. I checked the manual. But it is not clear to me. Please let me know some clear way.
Indian3675 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

10/3/2016 9:03 AM	Rate (0)
jacek d Platinum Member Joined: 9/23/2005 Last visit: 3/21/2023 Posts: 4122 Rating: (634)	I hope this one is closer to your hardware and it's clear enough.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded. #StayWithUkraine
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users PISCEAN 2010

10/4/2016 6:36 PM	Rate (0)
Indian3675 Posts: 3 Rating: (0)	Thanks sir, same circuit was in attached manual in previous post. Thanks a lot to all of you.
Indian3675 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/3/2021 10:05 PM	Rate (0)
Eng.RKh Member Joined: 3/13/2014 Last visit: 10/25/2022 Posts: 2 Rating: (0)	Hi dear Check the attachment for capacitors reforming Caspian fsf .Co Attachment Capacitors reforming.PDF (200 Downloads)
	Last edited by: Eng.RKh at: 04/03/2021 22:08:09
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on