Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics fine tuning guide line

Created by: Bobco at: 2/9/2010 9:28 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

2/9/2010 9:28 AM	Rate (0)
Bobco Regular Member Joined: 12/2/2009 Last visit: 1/16/2023 Posts: 35 Rating: (0)	Hello Guys, some body knows if exists a guide line to make a fine tuning of a torque motor driven by Sinamics S120? I mean how to find gain (Kp) and time value to have the best frequency response (Bode) and the best response to a step reference value. Thanks in advance.
	Last edited by: Bobco at: 2/9/2010 9:29 AM
Suggestion To thank Quote Answer

7/10/2012 8:17 PM	Rate (0)
Larry_Sullivan Posts: 4 Rating: (0)	Hi, Did you find a solution? I have the same problem with 1FW6 tuning.
Larry_Sullivan Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

7/11/2012 5:58 AM	Rate (1)
Ajay Gupta Posts: 58 Rating: (19)	Dear Bobco, Please see the attached zip file. It contains extracted pages from a drive tuning workshop held at erlangen, germany and a file regarding controller tuning from the product line drives. Hope these files will be helpful. Regards Ajay Gupta Attachment Drive Tuning.zip (384 Downloads)
Ajay Gupta Posts: 58 Rating: (19)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users mahdi.rahmaty

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on