Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik System 3TT

Created by: aliaghaei63 at: 2/13/2012 11:58 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/13/2012 11:58 AM	Rate (0)
aliaghaei63 Posts: 1 Rating: (0)	Dear I have a turning machine {index c200} with Sinumerik System 3tt.I have problem :PLC1 is run but PLC2 is stop mode,and on right coupling card 03840{6FX1122_2AD02} ,left LED continuously on and right LED flashing , I read manual{ 50_3 Installation Guide GA 4.pdf} and reset a lot of times,but PLC2 didn't goes to run mode .
aliaghaei63 Posts: 1 Rating: (0)	Last edited by: aliaghaei63 at: 2/14/2012 10:08 AM
Suggestion To thank Quote Answer

7/16/2012 10:18 AM	Rate (0)
p.t.r Posts: 1 Rating: (0)	Hello. We have the same problem with our machine loaded with Sinumerik 3M system. Is there some way how we can fix it? Thanks a lot for answer. Peter.
p.t.r Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

7/16/2012 10:00 PM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 5/25/2023 Posts: 967 Rating: (58)	HI, You really need a 511 card and go online to the plc to see what the problems are. Pee

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on