Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIPART PS2 PA

Created by: Ammy at: 8/18/2011 10:48 AM (12 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

8/18/2011 10:48 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	Hi All, I am facing the problem with SIPART PS2 Profibus PA type, on the Control Display it is showing the FS -- -- Error, I have checked the all possiblity related to the Error. Error Means Fail safe (air discharge valve opened). Possible causes No communication with master- Correct station address - Address is OK I can see in PDM Target mode set to ”MA” - Set target mode to ”automatic” with class 2 master - the valve is in Auto mode But what is mean by Class 2 master Master sending incorrect status - Send status ”0x80” (good) - on send I am getting good Status In Hardware Configuration I have defined as a READBACK, POS_D, SP i.e.Readback, position discrete, setpoint. for the Readback & POS_D Status I am getting the Hex 16 From PDM also I can able to initialization also from the Valve also I can able to do the initialization. Let me know what I have to look for this problem
	Last edited by: Ammy at: 8/18/2011 10:49 AM Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

8/18/2011 12:40 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	Please, check this FAQ. What may be the causes of the message "FS" when SIPART PS 2 PA is put into operation on the PROFIBUS PA? http://support.automation.siemens.com/BR/view/en/9653529 If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
	Last edited by: SUZUKI_BR at: 8/18/2011 12:41 PM If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/19/2011 5:14 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	SUZUKI_BR Please, check this FAQ. What may be the causes of the message "FS" when SIPART PS 2 PA is put into operation on the PROFIBUS PA? http://support.automation.siemens.com/BR/view/en/9653529 If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Industry Automation and Drive Technologies Division - Technical Support & Hotline - Hotline Req. Suporte: www.siemens.com.br/Hotline/SR Tel.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com Hi Suzuki, I have seen this post but still I can't able to solved the problem, any other way..... to overcome.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

8/19/2011 2:09 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	Ammy. If you put other Sipart PS2 what happen? its a good test to diagnostic this problem. what about EDD/GSD version?
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/19/2011 2:19 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	SUZUKI_BR Ammy. If you put other Sipart PS2 what happen? its a good test to diagnostic this problem. what about EDD/GSD version? Hi Suzuki, I have 17 SIPART & all having the same problem, & in the Diagnostic it is showing the Fail Safe open condition. & GSD is also correct one & Software revision is 5.00.02-00 / E1 & look like all the Valve having the same problem but I can't able to reach the right condition.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

8/19/2011 2:34 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	And bit quality? 80 hex? is the box only master on the buschecked? If is possibleremove the Link and acess inProfibus PA direct in coupler, what happen? can you get all diagnostics em PDM? What appears in bufferdiagnostic from CPU? Can youdescribe allhadware configuration?
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/20/2011 4:51 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	SUZUKI_BR And bit quality? 80 hex? is the box only master on the buschecked? If is possibleremove the Link and acess inProfibus PA direct in coupler, what happen? can you get all diagnostics em PDM? What appears in bufferdiagnostic from CPU? Can youdescribe allhadware configuration? Hi Suzuki, Here is the few offline Screen Shot & PDM Export List soon I will updte you with the online & PDM Screen Shot Also Checked my reply on PM Attachment SIPART.zip (409 Downloads)
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

8/20/2011 6:34 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	Hi Suzuki, Here is the updated Online Screen Shot, may be from this you can help me better way. Attachment SIPART.zip (435 Downloads)
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

8/22/2011 1:22 PM	Rate (0)
SUZUKI_BR Regular Member Joined: 12/13/2010 Last visit: 7/29/2022 Posts: 33 Rating: (1)	Hi Ammy, The PDM show a "Device did not receive cyclic setpoint". Did you try send a setpoint to Sipart?
	If you have any further questions please don't hesitate to contact us. Regards, Marcelo T. Suzuki Siemens Industry Sector Customer Service Division - Service Delivery - Technical Support & Hotline - Hotline Service Request: www.siemens.com.br/Hotline/SR Phone.: +55 11 3833-4974 E-Mail: atencao.cliente.ac.br@siemens.com
Suggestion To thank Quote Answer

8/23/2011 4:36 AM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 11/21/2024 Posts: 1525 Rating: (159)	SUZUKI_BR Hi Ammy, The PDM show a "Device did not receive cyclic setpoint". Did you try send a setpoint to Sipart? Hi Suzuki, yes I am sending the Cyclic Setpoint, if you see the SFC 15 it is sending without any error also. is something wrong in the my Logic or some setting....
	Last edited by: Ammy at: 8/23/2011 10:07 AM Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on