SIWAREX WP241 with 1214C and TP700 Basic Need Information

Hi Professionals,

I have this project where i need to calculate totallizer of flow rate. Now i tried wp241 integration with 1214C but i wasn't able to. So i did make it stand alone and communicated through TCP/IP. With that i will have current flow rate , weight and speed.

1) Can you generically brief whats the procedure to calibrate. Like after setting all the basic parameters i have to do zero calibration first then span or vise versa? For example step 1 setting basic parameters. Step 2 Load cell callibiration step 3 flow rate constant step 4 zzero error callibiration ?? Like wise

2) Also can i change MB ADD PTR in modbus connection on runtime so i can have current data in one DB and other data in other one?

3) Once calibrated i won't have use of siwarex own totallizers? What if it will go up highest number will it get stuck or on some error ? As i will be using my own totallizers.

Closed cause question posted twice.

The second thread with the subject SIWAREX WP241 with 1214C and TP700 Basic Need Information is published within the conference Process Instrumentation / Analytics / Weighing Systems SIWAREX

Best regards,
Jen_Moderator
​