Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SM 326F, DO 10x24VDC/2A - Operating mode selection in hw config

Created by: arondiste at: 7/14/2009 10:37 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/14/2009 10:37 AM	Rate (0)
arondiste Member Joined: 5/28/2009 Last visit: 6/20/2022 Posts: 2 Rating: (0)	Hello, I'm configuring my first fail safe S7-300 system, equipped with 326-2BF01-0AB0 safe digital outputs. In hardware configuration I can select the operating mode, and there are 2 available options for safe mode: SIL2 or SIL3 compliant mode. In hardware module manual and online help I couldn't find a clear description of the differences in module's behaviour in the different modes. Does anybody know where I can find such information? Thanks a lot, Stefano

Suggestion To thank Quote Answer

7/14/2009 11:36 AM	Rate (0)
OmegaProjects Silver Member Joined: 11/14/2008 Last visit: 8/29/2023 Posts: 504 Rating: (22)	Here you go , i found this manual on the Siemens site ... Hope it's useful Attachment SM326-6ES7326-2BF01-0AB0.pdf (88 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on