Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sm@rtServer dedicated screens

Created by: AutoGen_669140 at: 9/20/2017 11:20 PM (3 Replies)

Rating (3)

Thanks 0

4 Entries

9/20/2017 11:20 PM	Rate (0)
AutoGen_669140 Posts: 1 Rating: (0)	My customer want to monitor the most important production data of the plant on his smartphone. I have a TP1900 as main HMI of this automation system. I'm reading that with Sm@rtServer I can view HMI's screens via remote devices (PC or smartphone). As a smartphone is much smaller than a TP1900 and as main production data are scattered in several HMI's screen, can I create one or few HMI's screen reserved for "small display" sm@rtClient and display these screens only on remote clients? In other words: can I activate Sm@rtServer for some screen only? Thanks!
AutoGen_669140 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/21/2017 12:04 PM	Rate (1)
RobertJ85 Experienced Member Joined: 5/20/2014 Last visit: 9/26/2022 Posts: 57 Rating: (11)	I don't think you can. Sm@rt is just a gateway to view your HMI remotely. tiaportalhowto.com
	tiaportalhowto.com -> TIA Portal Tips, Tutorials, Videos, and more...
Suggestion To thank Quote Answer

9/21/2017 12:08 PM	Rate (1)
DJ_1 Gold Member Joined: 2/27/2014 Last visit: 9/4/2024 Posts: 689 Rating: (200)	Hello , This is not possible but you can create small mimic in HMI mini web page. So customer can access that web page and see the required information on his mobile phone. Have a look in below link. https://support.industry.siemens.com/cs/ww/en/view/109476153
	With Best Regards, DJ TIA Portal - Your Gateway to automation in the Digital enterprise If you feel this post is useful then don't forget to rate it
Suggestion To thank Quote Answer

9/25/2017 3:07 PM	Rate (1)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/15/2024 Posts: 14176 Rating: (1774)	Hello If you use a S71200 or S71500 PLC then you also can use userdefined Websites on its Wbserver. Here you can create "VERY SIMPLE" Sites for Basic information but Its "free" and independent to the Panel. If you want to use the Smart@Server Option then you can only view the native resolution of the Panel because the SmartServer on the Panel cannot send scaled Screens. Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on