Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SSV104 replacing

Created by: NickGashevsky at: 8/26/2008 11:20 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/26/2008 11:20 AM	Rate (0)
NickGashevsky Posts: 5 Rating: (0)	HowI can replace SSV104 with ordinary TP RJ45switch like Cisco or 3Com or Siemens? Network consists of S5-115, S5-155controllers with AUI interfaces. Systems wasbuild at 1995. SSV104 is broken and out of order. Thanks.
NickGashevsky Posts: 5 Rating: (0)	Last edited by: NickGashevsky at: 8/26/2008 11:37 AM
Suggestion To thank Quote Answer

8/26/2008 11:52 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Nick, well, this is not as easy as it sounds. This is because you need for each CP you have an Ethernet Transceiver, like one of the ones I added the picture of. Each of these Transceivers require the 15 V DC Power Supply of the CP they are connected to. So if you use a CP 143 instead of the CP 1430 you have those with the 15 V DC Power adaptor on it. Else wise you have the trouble that the Transceiver does not work. At the moment it is still possible, in some cases, to get these Transceivers but they are about to disappear, so you will have to get them soon. The RJ 45 Interface of these Transceivers offer a 10 MBit half duplex RJ 45 Interface. In case of the CP 1430 TF / TCP you do not need this adaptor, because the CP offers an automatic switch over of the signals to RJ 45 compatible signals, you only have to configure a cable according to this standard. In the Catalogue the Cable has been listed as: IE TP Converter Cord 15 / RJ 45 6XV1 850-2EE50 (0,5 m), 6XV1 850-2EH20 (1 m) I hope I could help a bit. Best regards J_Bell Attachment Ethernet Transceiver.jpg (325 Downloads)
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

8/26/2008 3:40 PM	Rate (0)
NickGashevsky Posts: 5 Rating: (0)	Thank your very much. And I Found "6GK5101-1BX00-2AA3 SIMATIC NET, SCALANCE X101-1AUI"mediaconverter. Can I use it in this case (1 for each CP S5)? Thanks.
NickGashevsky Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

8/26/2008 3:56 PM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 2/5/2024 Posts: 604 Rating: (56)	Hi, No it's not possible to connect the X101-1AUI directly to the S5 systems. you will always need the Transceiver to connect the X101-1AUI too. THe best solution is the solution which J_Bell has mentioned.
	Best regards, INS
Suggestion To thank Quote Answer

8/26/2008 4:17 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, I am sorry... but INS is right. The SCALANCE X Media converter does not fit in this situation. This device can be used to interface an AUI Network to a RJ45 Network, but not to interface an AUI node to a RJ45 Network. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

8/27/2008 7:47 AM	Rate (0)
NickGashevsky Posts: 5 Rating: (0)	Thanks. I will find Allied Telesyn CentreCOM -- AT-210TSand try to use it.
NickGashevsky Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on