Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STEP 7 Micro/WIN v4 project to STEP 7 v11 project

Created by: Ganes10 at: 7/21/2011 9:28 AM (16 Replies)

Rating (1)

Thanks 4

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

7/21/2011 9:28 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	Hi all, Where is the software available to convert the STEP 7 Micro/WIN v4 project to STEP 7 v11 project? It's hectic to convert a STEP 7 Micro/WIN v4 project to STEP 7 v10.5 project and again from STEP 7 v10.5 project to STEP 7 v11 project. For examplewhile converting a huge project from v4 to v10.5 there are 1600 errors and again from v10.5 to v11 there are 3300 errors . I wonder whatdoubles the errors when v10.5 project is converted into v11 project when v11 is a upgraded version of v10.5 Desperately waiting to have a software to convert STEP 7 Micro/WIN v4 project to STEP 7 v11 project.
	Like it? Rate it!
Suggestion To thank Quote Answer

7/21/2011 12:06 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	As you already tried after this "convert" finally there is a mess. But I am afraid this kind of "universal" tool will not be released. Even S7-200 to S7-1200 convertor now is hidden from here. Most probably because S7-200 series will be cancel soon.COmparing with the Step5 and Step7 converter is the same story - a lot of manual job in order to fix all the errors and warnings. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

7/21/2011 12:43 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	That's exactly the reason i convert manualy, another reason is if you have finaly converted it without errors the result is in most cases a big mess, hard to read. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

8/9/2011 1:33 PM	Rate (0)
Vippi Experienced Member Joined: 9/24/2008 Last visit: 10/7/2024 Posts: 106 Rating: (4)	Hi, what do you mean with "converting manually"? I imagined I would export a text file and then copy and paste in awl language, but there is no awl language for step7 Basic V11. @Umencho: " Even S7-200 to S7-1200 convertor now is hidden from here. Most probably because S7-200 series will be cancel soon" this would be a much serious reason to provide a S7200/S71200 converter REALLY working!! A have tons of programs ready to use for S7200, it would be the biggest waste of time if I should be obliged to re-write them from the beginning I really think Siemens is playing a wrong policy on micro automations...
	Last edited by: Vippi at: 8/9/2011 1:38 PM
Suggestion To thank Quote Answer

8/9/2011 7:46 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	Vippi Hi, what do you mean with "converting manually"? I imagined I would export a text file and then copy and paste in awl language, but there is no awl language for step7 Basic V11. S7-1200 doesn't support AWL hence STEP 7 Basic v11. Vippi this would be a much serious reason to provide a S7200/S71200 converter REALLY working!! A have tons of programs ready to use for S7200, it would be the biggest waste of time if I should be obliged to re-write them from the beginning I really think Siemens is playing a wrong policy on micro automations... Right now there is no powerful S7-200 to S7-1200 convertor and it will be available soon and let's keep our fingers crossed.
	Like it? Rate it!
Suggestion To thank Quote Answer

1/17/2012 3:00 PM	Rate (0)
otter Gold Member Joined: 9/30/2005 Last visit: 10/31/2024 Posts: 42 Rating: (13)	Hello, The new converter MicroWin to TIA V11 SP2 is available. It's to big to upload it here but you can ask it at your local Siemens representative. Succes.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ganes10

1/18/2012 1:04 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	otter Hello, The new converter MicroWin to TIA V11 SP2 is available. It's to big to upload it here but you can ask it at your local Siemens representative. Succes. Hello otter, It's good to hear Is the migration software available in the installation DVD or it is available after installing the software? If either of the above, pls do tell how to open it? Or you can get it only from local rep?
	Like it? Rate it!
Suggestion To thank Quote Answer

1/18/2012 4:47 PM	Rate (0)
otter Gold Member Joined: 9/30/2005 Last visit: 10/31/2024 Posts: 42 Rating: (13)	Hello Ganes 10 It's a sepperate programm, you have to install after the installation of V11 SP2. I've got it from our repres. from Siemens. if you have any questions you can always contact me. greetings

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ganes10

1/21/2012 12:42 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	Hello otter, Can you post few screenshots of the convertor? Does it accepts any project version of STEP 7 MicroWIN v4 or only projects created with SP8?
	Like it? Rate it!
Suggestion To thank Quote Answer

1/22/2012 11:22 AM	Rate (0)
otter Gold Member Joined: 9/30/2005 Last visit: 10/31/2024 Posts: 42 Rating: (13)	Hello Ganes, Hereby I send the manual. Hopely it will help you. Nice weekend Attachment s71200_converter_tool_en-US.pdf (4334 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ganes10

|

Share this page:

Share this page on...

Follow us on