Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step7

Created by: SN_2007 at: 8/3/2007 7:20 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/3/2007 7:20 AM	Rate (0)
SN_2007 Member Joined: 8/3/2007 Last visit: 8/8/2007 Posts: 4 Rating: (0)	After Configuring System Messages in Hardware configuration for S7-400 CPU and adding a simatic PC Station with an O.S, On Compilation the O.S,The CPU System Messages in WinCC Alarm Logging System i find some Messages as Invalid. Any Reasons for This??

Suggestion To thank

8/10/2007 12:41 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/14/2024 Posts: 4113 Rating: (195)	closed cause question posted twice. The second thread with the subject Alarm SubSystem in WINCC v6.2is published within the conference SIMATIC WinCC. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on