Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

System function trigger 'OnClick' not handled for VIEW_BUTTONS.

Created by: nesti at: 7/13/2006 10:02 AM (15 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

7/13/2006 10:02 AM	Rate (0)
nesti Posts: 8 Rating: (0)	hi, i am a newbie in hmi and i cannot resolve a simple problem i create aprojext using the built-in wizard, i make him add the navigation system, then i compilate the project and i permanently get a error that says "Error : System function trigger 'OnClick' not handled for VIEW_BUTTONS." i have no idea what the reason may be any ideas? thanks in advantage nestli
nesti Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

7/13/2006 10:13 PM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	Hi, It's not clear what is your question? Please repost if you want some help. Thanks

Suggestion To thank Quote Answer

7/14/2006 12:26 AM	Rate (0)
nesti Posts: 8 Rating: (0)	i am sorry that i didnt describe the problem properlyi create an empty project with the projeCt wizard and i add the navigation system, or add any button with the event 'OnClick' during the compilation i got the errors as in the topic: System functiontrigger 'OnClick' not handled for VIEW_BUTTONS the errors are associated with the buttons i have no idea how i can resolve this problem so i ask for help[:D] ps. please take out the "edit notes", i must have troubles with forum and i cannot edit the posts properly, the previous one is the best example
nesti Posts: 8 Rating: (0)	Last edited by: nesti at: 7/14/2006 12:37 AM Last edited by: nesti at: 7/14/2006 12:36 AM Last edited by: nesti at: 7/14/2006 12:35 AM Last edited by: nesti at: 7/14/2006 12:34 AM Last edited by: nesti at: 7/14/2006 12:31 AM Last edited by: nesti at: 7/14/2006 12:29 AM Last edited by: nesti at: 7/14/2006 12:28 AM Last edited by: nesti at: 7/14/2006 12:28 AM Last edited by: nesti at: 7/14/2006 12:27 AM Last edited by: nesti at: 7/14/2006 12:27 AM
Suggestion To thank Quote Answer

7/14/2006 9:15 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, did you have try the function => Porject > Compiler > Rebuild all After then, the problem should be solved. If not, then i think you should contact the Siemens Hotline. Regards,

Suggestion To thank Quote Answer

7/14/2006 9:31 AM	Rate (0)
nesti Posts: 8 Rating: (0)	it didn't work. it appears in the linking-target part og compilation, well maybe I should try siemens hotline, however i think i must have done something wrong...
nesti Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

7/14/2006 10:50 AM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	Hi, Which device type do you use?

Suggestion To thank Quote Answer

7/14/2006 11:41 AM	Rate (0)
nesti Posts: 8 Rating: (0)	TP 170B color
nesti Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

7/14/2006 12:17 PM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	Thnks for the device type. Like the Brain said I think a Rebuild All should have fixed it. The only thing I can think of is that 'on click' is an action you would normally use with a mouse connected and not a finger press action. Although this function does work on a touch panel maybe in this case it caused a problem - but normally this shouldn't matter. Sorry but it might also be a corrupt OS. Try an OS update and see if it is ok after. Hope this helps.

Suggestion To thank Quote Answer

7/14/2006 12:35 PM	Rate (0)
nesti Posts: 8 Rating: (0)	i work on XP Professional with SP2, and i do have switched on remote updates, ''rebuild all'' functiondoes not work. the problem is that when i created a switch that uses the 'Press' event, the compiler returned: System function trigger 'OnButtonDown' not handled forVIEW_BUTTONS. i started to woder if i do have all necessary software and libraries... thanks for help anyway:)
nesti Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

7/14/2006 1:38 PM	Rate (0)
skimmer Bronze Member Joined: 9/5/2007 Last visit: 3/7/2023 Posts: 317 Rating: (18)	Hi, Do you mean a button - a switch does not have the event 'Press'? Also, which version of wincc flexible do you have? If it's pre 2004 SP1 this is not released for XP SP2. Let us know

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on