Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

T400

Created by: kram lig at: 11/6/2010 6:21 PM (13 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

11/6/2010 6:21 PM	Rate (0)
kram lig Posts: 23 Rating: (0)	Please I've encountered a problem regarding downloading of the parameters in T400 Board! First i upload the technology parameters only using drive monitor and it was successfuly uploaded. Then i tried to download the parameters but it gives me a lot of rejected parameters. ERROR: Download ValueFailure PNR 1009[0] [F-No.:0] ERROR: Download ValueFailure PNR 1010[0] [F-No.:0] ERROR: Download ValueFailure PNR 1012[0] [F-No.:0] ERROR: Download ValueFailure PNR 1060[0] [F-No.:0] ERROR: Download ValueFailure PNR 1061[0] [F-No.:0] ERROR: Download ValueFailure PNR 1062[0] [F-No.:0] ERROR: Download ValueFailure PNR 1063[0] [F-No.:0] ERROR: Download ValueFailure PNR 1064[0] [F-No.:0] ERROR: Download ValueFailure PNR 1065[0] [F-No.:0] ERROR: Download ValueFailure PNR 1066[0] [F-No.:0] ERROR: Download ValueFailure PNR 1067[0] [F-No.:0] ERROR: Download ValueFailure PNR 1068[0] [F-No.:0] ERROR: Download ValueFailure PNR 1069[0] [F-No.:0] ERROR: Download ValueFailure PNR 1070[0] [F-No.:0] ERROR: Download ValueFailure PNR 1071[0] [F-No.:0] ERROR: Download ValueFailure PNR 1072[0] [F-No.:0] ERROR: Download ValueFailure PNR 1073[0] [F-No.:0] ERROR: Download ValueFailure PNR 1074[0] [F-No.:0] ERROR: Download ValueFailure PNR 1075[0] [F-No.:0] ERROR: Download ValueFailure PNR 1076[0] [F-No.:0] ERROR: Download ValueFailure PNR 1077[0] [F-No.:0] ERROR: Download ValueFailure PNR 1078[0] [F-No.:0] ERROR: Download ValueFailure PNR 1079[0] [F-No.:0] ERROR: Download ValueFailure PNR 1080[0] [F-No.:0] ERROR: Download ValueFailure PNR 1102[0] [F-No.:0] ERROR: Download ValueFailure PNR 1103[0] [F-No.:0] ERROR: Download ValueFailure PNR 1104[0] [F-No.:0] ERROR: Download ValueFailure PNR 1105[0] [F-No.:0] ERROR: Download ValueFailure PNR 1106[0] [F-No.:0] ERROR: Download ValueFailure PNR 1107[0] [F-No.:0] ERROR: Download ValueFailure PNR 1108[0] [F-No.:0] ERROR: Download ValueFailure PNR 1109[0] [F-No.:0] ERROR: Download ValueFailure PNR 1110[0] [F-No.:0] ERROR: Download ValueFailure PNR 1111[0] [F-No.:0] ERROR: Download ValueFailure PNR 1112[0] [F-No.:0] ERROR: Download ValueFailure PNR 1113[0] [F-No.:0] ERROR: Download ValueFailure PNR 1114[0] [F-No.:0] ERROR: Download ValueFailure PNR 1115[0] [F-No.:0] ERROR: Download ValueFailure PNR 1116[0] [F-No.:0] ERROR: Download ValueFailure PNR 1117[0] [F-No.:0] ERROR: Download ValueFailure PNR 1118[0] [F-No.:0] Can anyone help me with my problem on t400 board on how to do the properly downloading? I tried to manually change the said error values but i cannot see the parameters value writen above. Best Regards, kram lig
kram lig Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/7/2010 11:48 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/6/2024 Posts: 2211 Rating: (280)	Hello. What order number have your T400? Is it with standard program or the free-programmed?

Suggestion To thank Quote Answer

11/7/2010 10:32 PM	Rate (0)
kram lig Posts: 23 Rating: (0)	Hi Sir KSN for your information we used this technology 400 on the crane application. Regards, kram lig
kram lig Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/8/2010 4:03 PM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/6/2024 Posts: 2211 Rating: (280)	Hello. miami the T400 is sold empty or programmed: 6DD1606-0AD1 SIMADYN D TECHNOLOGY BOARD T400 6DD1842-0AA1 SIMADYN D T400 WITH AXIAL WINDER 6DD1842-0AB1 SIMADYN D T400 WITH ANGULAR SYNCHR.CONTR. 6DD1842-0AD1 SIMADYN D T400 WITH SHEET CUTTER What T400 do you have? If your T400 is used in the Simovert drive, check P053 parameter. If in Simoreg, check P051 and P927.

Suggestion To thank Quote Answer

11/8/2010 5:19 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 10/22/2024 Posts: 2198 Rating: (328)	kram lig Hi Sir KSN for your information we used this technology 400 on the crane application. Hello, Are you shure this parameters are not read-only parameter? You may have the "swing control" application. If yes, please check you have a T300 or T400 (The T300 has a removable memory module, the T400 not). The swing control onT300 is offical SIEMENS product, the one on T400 is a individual solution. If you have "swing control" on T300 you can send a support request. If you have "swing control" on T400 you must contact the person, department or company that solt it to you.

Suggestion To thank Quote Answer

11/8/2010 9:08 PM	Rate (0)
kram lig Posts: 23 Rating: (0)	Hello, Sir KSN we used 6 D01606-0AD0 technology 400 on simovert masterdrives VC (6SE7033-7TG60-Z). Sir MIAMI i dont know what you mean that "swing control"? We have a lot of machine that we are use a technology 400 and 300, In my 4 years of experiences doing a trouble shooting on the siemens drives is the first time that i encountering this kind of the problem and i want to do by my own risk before me calling a siemens local support. So pls. Sir's help me to solve my problem. Thank's for your expeditious reply! Regards, kram lig
kram lig Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/12/2010 7:54 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/6/2024 Posts: 2211 Rating: (280)	kram lig Hello, Sir KSN we used 6 D01606-0AD0 technology 400 on simovert masterdrives VC (6SE7033-7TG60-Z). 6DD1606-0AD0 is clear T400, which may be programmed using Step7, CFC and D7-SYS. It also may contain parameters, which you can upload and download using DriveMonitor. This parameters are created in CFC by using pseudo comments at block I/O's. I think you should ask the author of T400-program about this parameters.

Suggestion To thank Quote Answer

11/12/2010 11:45 AM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 10/22/2024 Posts: 2198 Rating: (328)	kram lig i dont know what you mean that "swing control"? I translated the german word "Pendelwinkeldämpfung" with swing control, maybeposition control is better. It shall prevent the swinging of the load when the crane moves or wind blows. In the attachment, when the crane turns (green) and stops, the load will swing (red). With aswing control (or positon control) the crane will move so, that the load is standing still, right above the target position, and the swinging will be compensated. As far as I know this control was realised in T300 and T400. It was not sold seperately as product, but as part of a solution (maybe with drives and mechanics) from the motion control department of Siemens. Attachment position control.jpg (321 Downloads)
	Last edited by: miami at: 11/12/2010 11:46 AM
Suggestion To thank Quote Answer

11/13/2010 4:13 PM	Rate (0)
kram lig Posts: 23 Rating: (0)	Thank's to both of you Sir for the prompt reply are very helpful to me. Sir KSN i tried to upload the parameters value on the working T400 Board, but the problem was when i download the parameters a lot of rejected value are notsuccessfullyloaded..! Any parameters need to change before i download it? More Power and GOD BLESS... Regards, kram lig
kram lig Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/14/2010 10:37 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 11/6/2024 Posts: 2211 Rating: (280)	Hello. How your PC with DriveMonitor is connected to the Simovert? Do you enable this parametrization interface in parameter P053?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on