Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

The address you entered is not valid!!

Created by: Masood_Es at: 12/8/2016 9:32 AM (8 Replies)

Rating (0)

Thanks 1

9 Entries

12/8/2016 9:32 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	Hi my friends I have a cpu 315 2pn/dp and any AI 8*13Bit. In HW config I had to set start address from IW100. First card address set to 100 but when Second card address set to 116 I give an error "The address you entered is not valid" and it suggest another address "128". I attached screenshot. How do I do this?
	Last edited by: Masoodes at: 12/8/2016 9:33:03 AM
Suggestion To thank Quote Answer

12/8/2016 9:41 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/1/2023 Posts: 21949 Rating: (2927)	Hello, this message menas that the adress range 116-127 already configured for another modul. In HWConfig you find a Adress overview in view -> Address overview here you see which adresses already used. regards Christoph P.S. which Screenshot?
	Last edited by: ChristophD at: 12/8/2016 9:41:32 AM
Suggestion To thank Quote Answer

12/8/2016 9:57 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	Attachment 01.JPG (460 Downloads)

Suggestion To thank Quote Answer

12/8/2016 9:58 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	Attachment 02.JPG (259 Downloads)

Suggestion To thank Quote Answer

12/8/2016 10:00 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	ChristophD Hello, this message menas that the adress range 116-127 already configured for another modul. In HWConfig you find a Adress overview in view -> Address overview here you see which adresses already used. regards Christoph P.S. which Screenshot? In Address overview written 116 to 271 is gap!

Suggestion To thank Quote Answer

12/8/2016 10:12 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 12/1/2023 Posts: 21949 Rating: (2927)	Hi, which process image size is configured in the PLC Properties? The Adress 116 + length for the Module can reached the processimage (default 128) so the adress can't be configured. regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Masood_Es

12/11/2016 5:55 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	ChristophD Hi, which process image size is configured in the PLC Properties? The Adress 116 + length for the Module can reached the processimage (default 128) so the adress can't be configured. regards Christoph How can prrossimage size be changed?

Suggestion To thank Quote Answer

12/11/2016 5:59 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	S7 Project Attachment test1.zip (242 Downloads)

Suggestion To thank Quote Answer

12/11/2016 6:28 AM	Rate (0)
Masood_Es Experienced Member Joined: 9/8/2015 Last visit: 11/26/2023 Posts: 107 Rating: (1)	ChristophD Hi, which process image size is configured in the PLC Properties? The Adress 116 + length for the Module can reached the processimage (default 128) so the adress can't be configured. regards Christoph With your answer solved my problem. I change process image size in CPU properties to a larger value.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on