Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TI Analog Alarm block for Step 7

Created by: Wink at: 10/11/2010 5:05 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/11/2010 5:05 AM	Rate (0)
Wink Posts: 4 Rating: (0)	Is there a converted TI analog alarm block for Step 7?
Wink Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

10/11/2010 12:56 PM	Rate (0)
billwest Posts: 510 Rating: (120)	Wink, Analog Alarms can be handled one of two ways. The first way is to writean alarm block to handle the analog alarms in the S7 program. The other way, is to use the converter program to generate the analog alarm block. The TI505 – S7 converter generates FB66, Analog Alarm, and FB67, Analog Alarm Caller. After the two FBs are debugged, the blocks can be included in the S7 program. Good Luck billwest
billwest Posts: 510 Rating: (120)
Suggestion To thank Quote Answer

10/13/2010 12:57 AM	Rate (0)
Wink Posts: 4 Rating: (0)	Hi Bill, thanks for the information you supplied. I have achieved my goal. Is there any information available about the converted blocks?
Wink Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on